Watlow EZwarePlus Programming Bedienungsanleitung PDF herunterladen (Seite 205)

EZwarePlus Programming Manual 197

Project Protection

Enable Project Protection in the System Parameter settings (Edit > System Parameters > General tab). Use the Project

Protection feature to set a unique password (Project key) in the project that will cause the project to run only on

specific HMIs that have a matching password (HMI key).

A developer can set the HMI key in the reserved local memory of the HMI (LW9046 configured for 32-bit unsigned

numeric format). This value is stored in non-volatile memory, and once it is set, the value is hidden and cannot be

read using a numeric display. In this way, only HMIs with the correct HMI key will be able to run the project. If the

Project key does not match the HMI key, local bit LB9046 is set and the driver is disabled and will not communicate

with the PLC.

 The HMI must be rebooted in order for the HMI key setting to take effect.

1010-1015, Rev. 03

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 263 264

Keine Kommentare

Watlow EZwarePlus Programming Bedienungsanleitung Seite 205