Watlow EZwarePlus Programming Bedienungsanleitung PDF herunterladen (Seite 50)

100

101

42 EZwarePlus Programming Manual

6. Click OK and place the Bit Lamp Object to the left of the tank. You can click and drag it to adjust its position

once you have placed it on the window.

7. Click on the screen to deselect the Bit Lamp Object, then double-click on it to reopen the properties (or right-

click on it and select Attribute) and click the Profile tab. Set the Width and Height to 50 (pixels).

8. Click OK to accept the new Profile properties.

9. Copy and paste the Bit Lamp Object (pump) to the same window and open the Properties window. Leave the

read address set to LB0 and set the Blinking Mode to Alternating image on state 1 (Blinking time: 0.5

seconds).

1010-1015, Rev. 03

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 263 264

Kommentare zu diesen Handbüchern

Keine Kommentare

Watlow EZwarePlus Programming Bedienungsanleitung Seite 50

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Watlow EZwarePlus Programming