Watlow EZwarePlus Programming Bedienungsanleitung PDF herunterladen (Seite 122)

114 EZwarePlus Programming Manual

The object can be configured to handle insufficient security in one of two ways:

• The object can be hidden while security is not sufficient (Make invisible while protected).

• The HMI can display the message defined as Message 1 in the System Message object

(Display warning message if access denied).

There are a number of local HMI addresses that can be used with the security features.

Address

Description

Data Type

Notes

LB9050

Reset security level to 0 (no security)

Boolean

Set momentarily to trigger.

Also

serves as user logout.

LB9060

Invalid password

Boolean

Set by the HMI when an invalid

password is entered. Must be

LB9061

Load new passwords

Boolean

Loads new passwords as defined by

LW9500

-9523

LW9219

User level

16-bit unsigned

Set to 1-12. Determines which

password is used.

LW9220

Password

32-bit unsigned

Enter password into this address to

change the security level

1010-1015, Rev. 03

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 263 264

Keine Kommentare

Watlow EZwarePlus Programming Bedienungsanleitung Seite 122