Watlow EZwarePlus Programming Bedienungsanleitung PDF herunterladen (Seite 175)

EZwarePlus Programming Manual 167

2. Click New… to create a new data sampling object.

3. Description: Enter a name for the object. This isn't necessary, but will help in later identification of the Data

Sampling object when configuring the Trend Display.

4. Sampling Mode: This can be either Time-based or Trigger-based. With Time-based selected, the sampling

interval can range from 0.1 seconds to 120 minutes. With Trigger-based selected, a PLC bit-address can be

configured to trigger each sample. The Mode can be OFF > ON, ON > OFF, or OFF <-> ON (toggle).

5. The Read address is the PLC register being sampled. Click the Setting… button to select the Device Type and

Address for the Data Sampling Object.

6. Max data records: Sets the maximum number of records to display in the Event Display (Real-time mode),

up to 86,400 (1 sample/sec * 24 hr). If Auto. stop is selected, data sampling automatically stops when the

number of records in Max data records has been reached. Otherwise, the existing logged data will continue

to be recorded in the datalog file beyond the number of records (samples) configured in the Max data

records field.

7. Click the Data Format... button to configure the format of each logged item. The Data Format dialog

appears.

1010-1015, Rev. 03

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 263 264

Keine Kommentare

Watlow EZwarePlus Programming Bedienungsanleitung Seite 175