Watlow EZwarePlus Programming Bedienungsanleitung PDF herunterladen (Seite 104)

96 EZwarePlus Programming Manual

To select all objects

1. On the Edit Menu, click Select All Objects.

2. Small, clear, square blocks appear around the perimeter of all the objects on the window.

3. You can now easily move, delete or copy the entire window screen to a new window.

Using the Undo and Redo commands

1. The Undo command is used to cancel the last command or action that you made.

2. Press the DELETE key on your keyboard to delete the text box.

3. From the Edit menu, click Undo or click the Undo icon from the Standard Toolbar. You can also press

CTRL+Z. The deleted text box reappears.

4. The Redo command is used to cancel the Undo command.

Using the Cut , Copy , and Paste commands

1. These commands are all selected from the Edit menu.

2. Select the graphics object or objects you wish to cut or copy.

3. Click Cut to copy and remove the graphics object(s) from the work area or click Copy to copy the

graphics object(s).

4. Objects cut or copied from one window can be pasted into other windows. Once the object has been

selected and cut or copied, open another window, then paste the object into that window.

5. The pasted object appears highlighted in the upper leftmost corner of the work area.

6. Move the object by clicking on the highlighted area and dragging it to the desired position.

Using the Multi-Copy command

The Multi-Copy command is used to make multiple copies of a single object on a screen. This is most useful

when creating new keyboards or data tables. In addition to copying the object, this command will

automatically assign new memory addresses to each object.

1. Select the object you wish to copy.

2. From the Edit menu, select Multi. Copy.... The Multi. Copy dialog box appears.

1010-1015, Rev. 03

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 263 264

Keine Kommentare

Watlow EZwarePlus Programming Bedienungsanleitung Seite 104