Watlow Series SD PID Profiling Controller Bedienungsanleitung PDF herunterladen (Seite 49)

Watlow Series SD • 47 • Chapter 10 Profiling

The Profiling Page allows you to enter your ramp and soak profile information. To go to the Profiling Page from the

Home Page, press the Advance Key

‰

and

[Prof]

appears in the lower display. Press the Up Key

to change the

upper display to

[~yes]

• Press the Advance Key ‰ to move through the profile parameter prompts.

• Press the Up ¿ or Down ¯ keys to change the profile parameter values.

• Press the Infinity Key ˆ at any time to return to the Home Page.

Note: The Profiling Page only appears if the profiling version has been ordered (SD_R- _ _ _ _- _ _ _ _ ).

Note: The Profiling Page is only accessible if the profile is on hold or not running.

[File] File

[step} Step

[Styp} Step Type

[Stpt] Set Point Step [soaH] Soak Step [``JL] Jump Loop Step {Lfil] Link File Step [`EnD] End Step (End)

[tg;SP] Target Set Point [hour] Hour [``JF] Jump File {~~LF] Link File [`EnD] Select End Typ

[hour] Hour* [min] Minutes [``JS] Jump Step

[min] Minutes* [`seC] Seconds [``JC] Jump Count

[`seC] Seconds* [ent_] Event Outputs 1-3

[rate] Rate** [wF;P} Wait-for Process Enablev

[ent_] Event Outputs 1-3 [wPr} Wait-for Process Value

[Prof] = [~Yes]

* Hour, minutes and seconds appear if Profile Type [PtYP] is set to [~~ti].

** Rate appears if Profile Type

[PtYP] is set to [rAtE].

The Profiling Menu

Display Parameter name

Description

Set-

tings

Range

(Integer values for Mod-

bus in parentheses.)

Default Modbus*

(less 40,001

offset)

Read/Write

Appears if:

[FiLe]

[FiLE]

File

Represents the profile to be edited

or viewed.

[```1] (1)

[```2] (2)

[```3] (3)

[```4] (4)

1 See page 53. Profiling version only.

(SD_ R - _ _ _ _ - _

_ _ _ )

[StEP]

Step

Represents the current step of the

profile to be edited or viewed. Up to

ten steps per file.

[```1] (1)

•

• thru

•

[``10] (10)

1 See page 53. Profiling version only.

(SD_ R - _ _ _ _ - _

_ _ _ )

[StYp]

[StYP]

Step Type

Select from five different step types.

[`end] End (0)

[stpt] Set Point (1)

[soaH] Soak (2)

[``jl] Jump Loop (3)

[LFil] Link File (4)

[`end] (0)

See page 53. Profiling version only.

(SD_ R - _ _ _ _ - _

_ _ _ )

Note: Some values will be rounded off to fit in the four-character display. Full values can be read with Modbus. All temperature

parameters are in °F through Modbus.

* Low register numbers contain the two higher bytes; high register numbers contain the two lower bytes of the four-byte integer.

Decimal precision is implied at three decimal places unless otherwise noted.

Chapter 10: Profiling Page

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Watlow Series SD PID Profiling Controller Bedienungsanleitung Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Watlow Series SD PID Profiling Controller