Watlow NAFEM Gateway Bedienungsanleitung PDF herunterladen (Seite 7)

Installation & Wiring

Connect the T+/R+ to the devices’ T+/R+ terminals, the T-/R- to the devices’ T-/R- terminals and the Com

to the devices’ Com terminal in a daisy chain fashion.

Plug in an RJ45 Category 5 straight wired cable to an Ethernet switch / hub.

If you are connecting directly to a PC, you will need to use an RJ45 Category 5 cross-wired cable.

For Models NGWC-0000-0000 and NGW0-0000-0000, connect the 5-volt power supply plug to the power

supply jack. The inner terminal of the coaxial plug is positive.

For Models NGWC-0000-2400 and NGW0-0000-2400, connect the 24-volt power supply plug to the

power supply jack. The inner terminal of the coaxial plug is positive.

Note: Use proper ESD handling procedures when making connections to unit. A UL Class 2 and CE

approved power supply is required for compliance.

Dimensions are in inches

1 2 3 4 5 6 7 8 9 10 11 12 ... 50 51

Keine Kommentare

Watlow NAFEM Gateway Bedienungsanleitung Seite 7