Watlow LogicPro Bedienungsanleitung PDF herunterladen (Seite 45)

LogicPro User’s Guide Chapter 3: Projects

Doc.# 28002-00 Rev 3.00 Watlow Anafaze 29

To copy a Project:

1. If a Project is being used by LogicPro, close it.

a) Select File.

b) Select Close.

c) Select Project.

2. Copy the Project directory using any file utility such as

Windows Explorer. Copy the entire directory including

all files and subdirectories. Do not rename any directory

or file name; LogicPro will not recognize a Project in a

folder if the name has been changed.

3. Open the Project.

a) Select File.

b) Select Open.

c) Select Project. The Open Project dialog box ap-

pears, as shown in Figure 3.3 on page 27.

d) The Project will not be listed. Select Build List

from the dialog box. The Rebuild Project List

dialog box appears, as shown in Figure 3.4 on page

28.

e) Enter a drive in the Start Drive and End Drive

fields. LogicPro searches the drive(s) entered and

produces a list of all available Projects.

f) Click on the copied Project.

g) Click [OK].

Backing Up a Project

You can back up or copy a project to any location that is

accessible to the computer. Backing up is the equivalent to

Save As for projects. To backup a project:

NOTE! A project must be closed before you can back it

up!

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 295 296

Keine Kommentare

Watlow LogicPro Bedienungsanleitung Seite 45