Watlow 8PID Controller Bedienungsanleitung PDF herunterladen (Seite 45)

2. HARDWARE DESCRIPTION

2.1 ANAFAZE 8-PID CONNECTION

The Alarm Expander Board plugs into the A8PID at connector J3 and connects to J2 by a

short ribbon cable.

The alarm expander can be used with ANAFAZE 8 PID units with a serial number of

2000 and higher. Please consult the factory for information regarding earlier units.

2.2 EXTERNAL INTERFACE

The I/O interface is accomplished by a 50-pin flat cable connecting J1 on the AEX Board

to an external I/O Module Board such as the GORDOS PB-24 or OPTO PB-24. The I/O

Board accepts plug-in AC/DC INPUT/OUTPUT modules selected to match the users

needs.

AEX Board J1 Connection Diagram

J1 Pin Nr I/O Line Nr. J1 Pin Nr Signal

01 NU 02 Ground

03 NU 04 Ground

05 21 06 Ground

07 20 08 Ground

09 19 10 Ground

11 18 12 Ground

13 17 14 Ground

15 16 16 Ground

17 15 18 Ground

19 14 20 Ground

21 13 22 Ground

23 12 24 Ground

25 11 26 Ground

27 10 28 Ground

29 09 30 Ground

31 08 32 Ground

33 07 34 Ground

35 06 36 Ground

37 05 38 Ground

39 04 40 Ground

41 03 42 Ground

43 02 44 Ground

45 01 46 Ground

47 00 48 Ground

49 +5VDC 50 Ground

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 54 55

Keine Kommentare

Watlow 8PID Controller Bedienungsanleitung Seite 45